DVI audio Cat5 extender

klicktv

Gefen - EXT-DVI-AUDIO-CAT5

Our DVI Audio Extender extends your DVI and digital/analog audio up to 200 feet away from your HDTV DVI or HDMI™ source using cost effective CAT-5 cables.

The DVI Audio Extender sender unit sits next to your video source such as computer, DVD player or any set-top box. The cables supplied with the DVI Audio Extender connect your video source/audio source to the sender. Your display/audio receiver plugs into the back of the DVI Audio Extender receiver. Two CAT-5 cables* connect the sender and the receiver units to each other.

* - A shielded CAT-5e or CAT-6 cable for DDC is recommended for optimal video quality. The video CAT-5 cable does not need to be shielded.

Note:  The DVI Audio Extender is HDCP Compliant.

Features:
  • Extends any DVI & Digital or Analog Audio compliant device up to 200 feet from the computer
  • Uses CAT-5e cable for DDC and control signals
  • Supports Digital 8.1(DTS, Dolby Digital, etc.)
  • Audio and video are transmitted digitally over the CAT-5e cable for zero signal loss
  • Supports resolutions up to 1080p, 2K, and 1920 x 1200
  • Supports DDWG standard for DVI compliant monitors
  • HDCP compliant
Specifications:
  • Data Transmission Rate: 12.8 Mb/s
  • Digital Audio Input/Output: S/PDIF (Digital Coax), Optical TOSlink
  • Analog Audio Input/Output: RCA Left and Right
  • S/PDIF (Digital Coax): 96 kHz Performance
  • Video Amplifier Bandwidth: 165 MHz
  • Single Link Range:1080P/1920 x 1200
  • Input Video Signal:1.2 volts p-p
  • Input DDC Signal: 5 volts p-p (TTL)
  • Input/Output DVI Connector: DVI-I (29 pin) female, Supports ONLY Digital Signals
  • Link Connector: RJ-45
  • Power Supply: (2) 5Vdc Power Supplies / 10W each power consumption (max)
  • Dimensions: 3.3"D x 5.5"W x 1"H
  • Shipping Weight: 4 Lbs

© klicktv